NM Round Flotation Cell

In the general mineral processing process, the flotation machine is an important equipment for froth flotation. After the slurry is fully aerated and stirred, useful minerals are enriched to complete the flotation operation. The excellent performance of Mecru NM round flotation cell greatly improves the flotation recovery rate of coarse and fine particles. The operation is simple, the energy consumption and air consumption are very low, and the modular layout is allowed.

Products Details

Product Introduction:

In the general mineral processing process, the flotation machine is an important equipment for froth flotation. After the slurry is fully aerated and stirred, useful minerals are enriched to complete the flotation operation. The excellent performance of Mecru NM round flotation cell greatly improves the flotation recovery rate of coarse and fine particles. The operation is simple, the energy consumption and air consumption are very low, and the modular layout is allowed.

Product Advantages:

1. Mecru NM round flotation machine has froth chute with correct design and direction, which ensures excellent flotation index during production. 2. The froth flotation process is mature and reliable, suitable for most ores, and has excellent flotation performance. 3. The froth flotation process is upgraded. Compared with products of the same type, the area is smaller and the energy consumption is lower. 4. Reasonable deployment combined with advanced technology at home and abroad, the auxiliary equipment is used less, the process flow is compact, and the cost is reduced and the efficiency is increased. 5. Optimized technology, improved recovery rate, improved control system, adapts to changes in different feed grades and capacity.

Working Principle:

When the flotation machine is working, as the impeller rotates, the slurry in the tank is sucked from the bottom of the impeller to the blades of the impeller from the bottom of the tank. At the same time, the low pressure air fed by the blower is into it through the hollow shaft and the air distributor of the impeller. After the pulp and air are fully mixed between the blades, they are pushed out from the upper half of the impeller in an upward direction, and flow stably and oriented by the stator to enter the entire flotation cell for flotation.

Product Parameters:

Model

Tank volume(m³)

Tank diameter(mm)

Tank height(mm)

NM-0.8

0.8

1 100

1 100

NM-3

3

1 850

1 845

NM-5

5

2 150

2 095

NM-10

10

2 700

2 590

NM-15

15

3 080

2 890

NM-20

20

3 370

3 150

NM-30

30

3 800

3 470

NM-40

40

4 240

3 950

NM-50

50

4 500

4 180

NM-70

70

5 000

4 640

NM-100

100

5 650

5 350

NM-130

130

6 150

5 800

NM-160

160

6 500

6 400

NM-200

200

7 100

6 650

NM-300

300

8 150

7 610

NM-600

600

10 300

9 770

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours